I have worked on several areas the last few days. First was a coat of hysol on the rudder top and vertical top. This was allowed to cure for a few days then sanded down. The rudder was close to what I’m trying shape but needed another coat to get there.Same with the vertical but it’s probably going to take several applications of hysol to get it right.In the meantime I moved on to fit the seat pan. This is a pic of a nut plate. It’s on backwards so that I can back drill the rivet holes. There are six mounting tabs, two on the top and four on the bottom.This shows the nut plates riveted in place.Just one pic of the seat pan. There was a lot of cutting,fitting and sanding involved to fit this in place. The slots are for the four point harnesses to fit through.Just got started fitting the aluminum stringers. There are three, one on each side and the bottom.
And Now For A Little Assembly 